Grout Admixture Power 176 || Tipro Industries

Grout Admixture Powder 176 is specially designed Latex Admix to be used with Sanded & Unsanded Grout.

When the tiles/ stones have set firm, spacers and bottom support can be removed.
Use Grout Admixture Power 176 with Tipro 200 Series when grout joints are less than 3 mm wide andTipro 300 series Sanded Grout Filler (available in a range of colours) for joints 3mm – 12mm.
The Cement based colour joints are strong and are resistant to weather, cracking and discolouration.
Mix only enough material that can be used in 30 min or less. Clean up immediately before beginning next mix.
When applying, the grout joints should be free of dirt, debris or tile spacers. Sponge or wipe dust/dirt of tile faces and remove water standing in joints. Pack joints full and free of voids with rubber grouting float. Remove excess grout from tile faces using edge of rubber float and diagonal strokes (at 45° angle to direction of joints). When the joints have set, use a moist sponge to remove excess grout from the tile and joint. Use minimum water for clean up. Final clean up to remove any grout haze should be carried out within the next 12 – 24 hours

It improves the performance of portland cement grouts for all types of ceramic tile, brick, marble, natural stone and agglomerate stone installations.

Grout Admixture Power 176